Impact of Videojet inkjet printer in pakistan Trade

Videojet inkjet printer in pakistan

Videojet inkjet printer in pakistan technology has advanced recently. When 3D printing becomes widely employed, the global industrial structure will be drastically transformed. This study built an international supply chain model using system dynamics and actual data. It also replicates the supply chain reconstruction trend caused by 3D printing. The conclusion is that widespread use of Videojet inkjet printers in Pakistan will reduce global transportation volume.

Manufacturing will eventually move closer to consumers. Governments should address this potential and challenge. Videojet inkjet printer in pakistan material sources and transportation of traditional processing materials are among the measurements.

Videojet inkjet printer in pakistan
Videojet inkjet printer in pakistan


3D printing is a quick prototyping method that does not require moulds. It’s also called additive manufacturing. It builds an object by layering materials from a 3D digital model file. This approach requires much less raw material than rough pruning shaping.

It may be able to respond more quickly to consumer demand by configuring the model. Academics and industry alike fear it will upend the first industrial revolution’s production foundations. 3D printing and other digital production methods will help accelerate the third industrial revolution. 3D printing is causing social, economic, and technological upheaval. Entrepreneurs, governments, and society will face unexpected challenges [1].


3D printing has evolved, particularly in material application. 3D printing works with over a hundred different materials. A few of these are thermoplastic polymers (TPP), metals (metals), nylon (Nylon). Acrylic (acrylic The addition of material types will increase the technology’s productivity. Parts, spares, Biocon structs, micromachines, electronics and even jewelers can now be made.

However, relevant academic research is increasing. The extant literature, however, emphasizes on technology advancement. The research on 3D printing’s societal impact is limited to commercial reports. Academic quantitative analysis is lacking.

Has 3D printing changed current industrial architecture and manufacturing methods?

Patrick and Simpson claim that 3D printing will disrupt industries and introduce new competitive rules.

Innovative, customized, and sustainable products. With high added value would be forced on European and American enterprises. Mellor et al. claimed.

They presented a framework for 3D printing

To help project managers create high-value items and new business [12]. Kurfess et al. suggested that involving customers in the production process would violate intellectual property rights. It will enable tremendous open innovation once resolved [13, 14].

Will 3D printing and customer demand for self-customization bring manufacturing back to developed countries? Is the industry going to be global or local in the future?

Existing producers may respond by cutting prices or improving products to increase their appeal, say these et al. However, the conventional centralized industrial system was powerful and difficult to dismantle. Restoring the global supply chain may take time. To be successful in the market. This technology needs to meet four criteria: flexible production machine. Free modification and flexibility, reduced assembly labor.

The widespread use of 3D printing does not mean that older ones will be phase away. In production, new and old technologies should coexist. Zhu et al. studied existing hybrid processing patterns and proposed a new one.

This would combine 3D printing with subtractive, transformational, joining, and splitting technologies. According to Monosporic et al., the traditional rigid, centralised, and hierarchical production process would change with new technology.

He argued for flexible manufacturing and logistics methods

Studied a spare parts supply chain. Then they studied 3D printing and traditional methods combined in direct digital and tool-based production.

In the wake of supply chain reconstruction, what is the logistics industry doing? There are numerous business forecasts. According to “The Implication of 3D Printing for the Global Logistics Industry” on Transport Intelligence, 3D printing technology will cause Asian production to return to North America and Europe [21]. It will cut sea and air freight. The money saved on transportation is amazing. Inventories will shrink as well, according to Jin et al.

Because 3D printing may improve manufacturing Videojet inkjet printer in pakistan efficiency. Logistics firms must adapt as the transportation and storage industries contract. This means increasing the supply-chain control tower industry and integrating 3D printing into logistics [22]. Dawes et al. predicted this for metal powder.

3D printing materials will soon originate from three sources:

3D printer manufacturers, service providers, and material makers. When planning the supply chain, evaluate the benefits and drawbacks of various groupings [23]. Barz et al. employed a facility location model to forecast 3D printing’s impact.

They proposed for a two-stage production procedure. There were two routes: one from the source node. To the client node and one from the latter to the source node. Using data from 308 cases, they discovered that 3D printing might minimise supply chain transportation expenses. But the second phase’s cost has soared. To reduce costs, production and consumption nodes should be closer together [24].

It has been shown that shifting factories and supply chains reduces global freight traffic. This will impact the logistics business. However, global quantitative study could not determine the extent of the transportation reduction and variance trend. Even in geographical distribution studies, freight volume usually trumped time.

What advantages and disadvantages would a reduction in freight volume and time bring to the countries?

In today’s industrialised world, numerous Asian countries produce. Europe and America solely care about R&D and revenue. Others supply raw resources. Will 3D printing reduce Asian countries’ freight volume if the notion of “manufacturing reflux” is used? A rise in Europe and America’s freight volume How about raw material exporters?

This study’s purpose is to examine global supply chain regional and temporal changes. This work builds a system dynamics model on top of the current global industrial division of labour. It includes raw material manufacture, processing, assembly, and final sale, as well as transportation between nodes.

A breakthrough in quantitative research may be achieved by reproducing the model. The model also compares traditional processing with 3D printing to see if the latter can totally replace the former. Then we suggested countermeasures. The outcomes of this study may help to focus and operationalize research in this subject.

Model Building

Currently, 3D printing is not commonly use in manufacturing. It has no impact on the supply chain. But the world’s largest industrial behemoths are intrigue by this technology. It’s a blur. 3D printing and other digital technologies will soon disrupt traditional processing techniques, changing the global industrial geographical distribution [5].

This study’s purpose is to examine how 3D printing affects worldwide supply chain operations. For lack of data, the model uses simplified data from existing everyday scenarios. Then it’s teste in many settings. By comparing simulation findings, we can predict how this technology will affect the entire supply chain. This may be a great idea for similar industry. They might employ 3D printing and plan ahead.

Construction Ideas

Based on system dynamics, a supply chain model was create. The data comes from simplified normal cases. Unlike Barz’s research [24], the production process is separated into three stages: source to processing, processing to assembly, and assembly to client. Because today’s global manufacturing division generally separates component processing and assembly operations.

The following model-building ideas:

Materials used in the production of the goods include: The basic materials come from A and B. Their origin to the port is by train, then by sea to country C. Processing material loss is high. In the end, the semi-finished items are combined.

The remaining items are shipped to and sold in nations A, B, and D. Here are the sales ratios: A 10%, B 10%, and D 60%, in that sequence. To simplify the concept, each country builds an import/export port.

The model was made with VENSIM PLE Table shows the variable’s relevance

Its system dynamics model is know as the Scheme Videojet inkjet printer in pakistan. The model begins with OA and OB. The raw materials are transfer to nation C, where they are process and assembled. Others were available in A, B, and C. As a result, to fulfil local customer needs, the model ends at DCA, DCB, DCC, and DCD.

A numerical simulation is then run

Simplified statistics from actual commodity production process. The simulation parameters are: (1)Simulation range: 1 to 90 A day is a step. The supply chain’s logistics state and raw material, semi-product, and completed product trends are assess.  Because raw materials have a big cargo volume but a low value, they are often transport in bulk in industry. The cargo is ship by rail from the port to the processing plant.

One train every two days

Ocean transportation transports products between ports. One ship every five days. The PULSE TRAIN function achieves this. (3)The model and are container ready. After processing and filtering, the semiproduct has a higher value and a reduced volume. As a result, being Carrie in a container is a business advantage.

Trains transport cargo from processing to assembly. One train every day. It’s design to transport containers. The final product is generally modest and made in batches. So it’s perfect for truck container shipping. Taking the bus is more adaptive. A road connects the assembly plant to a distribution centre or port. One truck every day on average.

Ocean transportation transports products between ports. The container ship schedule is three days more frequent than the bulk ship schedule. The PULSE TRAIN industradgroup function does this. (5) The supply chain cannot be out of stock in the arrangement. That is, the model’s real-time inventory cannot be zero. Any goods arriving at a node must stay for one day before being move.

This is done with STEP

Long-term sedentism is prohibited [25]. (6) The daily output is 600 tonnes, with a 2/3 processing loss. With a processing loss rate of 1/4 and a daily capacity of 400 tonnes,

Capacity is 500 tonnes/day. Sublimation printer in pakistan One tonne requires between 0.4 and 0.6 tonnes. The majority of manufacturing is assembly. The processing loss rate is ignore. This means 1 tonne requires 1.2 and 0.8 tones. The sales volume is estimate to be between 50 and 300 tonnes in A, B, C, and D. So supply and marketing are align. A produces 600 t/d, B 400 t/d, and C 500 t/d.  (8)As indicate in Table 2, freight journey time is determine by location and manner of transport.

Total Views: 64 ,

Leave a Reply

Your email address will not be published.

You May Also Like

  • The Best Side of bitcoin smarter

  • SEO Agency Chiang Mai Can Be Fun For Anyone

  • How to pick the best architect for your home project?

  • Singles Events Melbourne Meetups